Transcom
 
 
Radio-Studio Transmitter Link
 
Radio Microwave Antenna
 
All prices are list, please call or email for a quotation
 
 

RADIO Studio Transmitter Link

 Nicom

FM STL Transmitter System

Model
Description
Price
RSL 900 STL Receiver
Features: Frequency Ranges: 940 to 960 MHz 200 to 240 MHz - 300 to 330 MHz + other frequencies upon request; Input Impedance & Connector: 50 ohm type 'N' female; Audio Frequency Output: 0 dBm at 600 ohms +/- 6dB adj.; IF Output: 0dBm at 10.7MHz / 50 ohms; De-emphasis: 50 / 75us; Input Voltage Range: 10uV - 30mV rms.
$2,380.00
TSL 910 STL Transmitter
Features: Frequency Ranges: 940 to 960 MHz - 200 to 240 MHz - 300 to 330 MHz +other frequencies upon request; Output Impedance & Connector: 50 ohm type 'N' female; Harmonic Frequencies Level (ref. to carrier): < -65 dB; Spurious Frequencies Level (ref. to carrier): < -80 dB; Input Impedance: 600 ohms or greater; Input Level: -6 dBm to +10 dBm nominal for +/-75 Khz deviation adj. $2,720.00
Total System
Zero to 12 watts output power, front panel adjustable; Remote control built in in RS 232; Externally programmable in 25 Khz steps; 3 SCA's; RF monitoring BNC in the transmitter's front panel; IF monitoring in the receiver's front panel; All functions via LCD password protected; Monitoring software included; Meets or exceeds all FCC and CCIR requirements. FOB: National City, CA $5,100.00

Top 

OMB


MT/MR Platinum STL

Model
Description
Price
MT/MR Platinum
The MT/MR PLATINUM FM STL (Studio to transmitter Link), is one of the latest OMB products. It is made up of a 20W (200~960MHz)transmitter externally synthesized in 20MHz sub-bands with a step of 10-25-100KHz (customer request), microprocessor controlled, LCD display for the visualization of the most relevant transmission parameters (frequency, forward and reflected power, modulation level, pilot signal …), balanced Mono, Stereo (MPX) and 3 SCA inputs and SWR fold back protection. Furthermore, the "MT/MR Platinum" STL includes a jumper in order to get a proper operation with digital signals. $3,920.00

(940-960MHz)

 

$3780.00

(170-570MHz)

 


MT/MR Platinum >1GHz

Model
Description
Price
MT/MR Platinum >1GHz
The MT/MR PLATINUM >1GHz is a high-performance Studio-to-Transmitter Link. It is made up of the 5W MT transmitter externally synthesized in 10MHz sub-bands with a step of 10KHz, and the MR double conversion receiver, that is externally synthesized too. The MT is microprocessor controlled, and includes LCD display for the visualization of the most relevant transmission parameters (frequency (6-digit), forward and reflected power, modulation level), balanced Mono, Stereo (MPX). The MR receiver has the same visualization system than the transmitter. It includes balanced Mono and Stereo (MPX) outputs. Furthermore, the "MT/MR Platinum" STL includes a jumper in order to get a proper operation with digital signals. $4,750.00

Top 

 Marti Electronics


STL-20M

Model
Description
Price
STL-20M
The STL-20M is a new Mono STL that incorporates the proven synthesizer and RF power amp design that is now in the SRPT-30, SRPT-40A and the STL-20C. This unit is being introduced first in the 940 to 965 MHz band and delivers 20 watts of power. This is the most powerful mono STL transmitter on the market today. Features: Frequency Range and Continuous Duty Maximum Power Output - 50 ohms ( 10%) 940-965 MHz, 20 Watts; Frequency Selection - For the 940-965 MHz STL band. (Can be set for 20 or 25kHz steps. Single frequency is factory set.); Front Panel Controls - On/Off, Power Adjust, Meter Switch; Metering - Precision "Peak Hold" Bar Graph Modulation Meter. Indicates forward power, reverse power, PA current, subcarrier level. LEDS indicate transmit, AFC lock, High VSWR, and High Temp. FOB: Quincy, IL. CALL/EMAIL

 


STL-20C

Model
Description
Price
STL-20C
The STL-20C is our latest composite STL transmitter. This transmitter replaces the STL-15C for the 950 MHz band. Features: Frequency Range and Continuous Duty Maximum Power Output (10%) - for 940 to 965 MHz only. 20 Watts; Metering - Precision "Peak-hold" Bar Graph Modulation Meter. Indicates forward power, reverse power, PA current, subcarrier level. LEDs indicate transmit, Composite Mode, Mono Mode, AFC lock, High VSWR, and High Temp.; Composite Audio Inputs - BNC Connector, 5 K ohms, 3.5v p-p for 100% modulation
Audio Inputs - Balanced 600 ohms Barrier strip; Audio Input Level - +8 dBm; Subcarrier Inputs - Two BNC connectors for Remote Control and Subcarrier Inputs, 50 to 600 ohms unbalanced; Accessory Connector - 15 pin connector on rear panel provides filtered outputs for Remote Control, Remote Power Metering; RF Connector - Type N Female. FOB: Quincy, IL
CALL/EMAIL

Top 

  Radio Microwave Antenna

Nicom Radio STL Antennas

RKB 14

Model
Description
List Price

RKB 14

This antenna was created to be used for STL purpose. It is very light and easy to use. Due to its construction, this antenna is not suggested to be used in areas with severe weather. It comes with N type connector.
$195.00

 

Grid Reflector Antenna

BKP 950

Model
Description
List Price

BKP 950

The Nicom Grid Reflector is a semi-parabolic antenna with high gain used for STL systems in the 940-960 MHz range. Our engineers have effectively designed this antenna of stainless steel, making it much stronger and more durable in all weather conditions as compared to similar aluminum antennas. Although of steel, the wind load and weight have not been increased. Mounting brackets for up to 3" are included as standard equipment.
$990.00

 

Top 

 

Andrew


Mini GRIDPAK Antennas

Model
Description
Price
MKP
GRIDPAK Antennas for FM- Unpressurized Single Polarized. Inputs: 7/8" EIA, "F" Flange Female, Type N Female and 7-16 DIN Female. 820-960 MHz.
CALL

 

OMB

 

 

Model

Description

Price

ANT RR

 

The ANT RR is a Yagi-Uda antenna that has been designed to be used with vertical or horizontal polarization. It provides wide bandwidth and high-directivity. It is made up of 14 elements, a reflector and a dipole. The ANT RR is made of stainless steel, and is protected by a polyester radome in order to allow working in really hard environmental conditions.

Call/email

 

 

Model

Description

Price

ANT TX-RR

 

 

 

The ANT TX-RR is a high-quality low-cost Yagi-Uda antenna, designed to be used with vertical or horizontal polarization, and to provide high-directivity. It is made of aluminium with stainless steel clamps, and the output connector is N Female type. Its radioelectric inalterability has been tested. Furthermore, ANT TX-RX provides high gain, is really light and it can work even in really hard environmental conditions. It is manufactured for frequencies between 175 and 960MHz, in 20/30MHz bands. It offers from 10 to 14dB gain depending on the operating frequency.

Call/email

 

 

 

Model

Description

Price

TX-RR 1660-1670

 

 

 

The TX-RR 1660-1670 is a high-quality low-cost Yagi-Uda antenna, designed to be used with vertical or horizontal polarization, and to provide high-directivity. It is made of stainless steel, brass and PVC radome. The output connector is N Female type. Its radioelectric inalterability has been tested. Furthermore, the TX-RX 1660-1670 provides high gain, is really light and it can work even in really hard environmental conditions.

Call/email

 

 

Top 

 All prices are list, please call or email for a quote